ADEMCO 5110XM Manuale Utente Scaricare il pdf

5110XM-PR 4/96

ADEMCO 5110XM PROGRAMMING FORM

FIELD FUNCTION PROGRAMMED VALUES

[ ] = Default Value

SYSTEM SETUP (

20,

27)

20 MASTER CODE ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ [5] [1] [1] [0]

Enter 4 digits, 0-9

Note:

Master code for installer usage only. When remote keypad

installed, program user 2 code for system's principal user.

27 OUTPUT TO LONG RANGE RADIO

ÊÊÊÊ

[0]

0 = no; 1 = yes

If yes, dialer reports to PRIMARY No. (field

47) will also be sent via LRR. All

dialer and LRR reports will be in Contact ID format (overriding field

selection).

This option has not been evaluated by UL and must be programmed to "0."

MISCELLANEOUS OPTIONS (

30-

34)

30 ALARM BELL TIMEOUT

ÊÊÊÊ

[0]

0 = none; 1= 4 min; 2 = 8 min; 3 = 12 min; 4 = 16 min

For fire installations, bell must be programmed for option "0," "2," "3," or "4."

31 AUXILIARY RELAY TIMEOUT

ÊÊÊÊ

[4]

0 = none; 1= 4 min; 2 = 8 min; 3 = 12 min; 4 = 16 min

32 SUPERVISORY ON OPEN/SHORT

ÊÊÊÊ

[0]

0 = Trouble on Open/Supv on Short; 1 = Supv on Open/Supv on Short

33 BACK-UP DIALER PULSE/TONE ÊÊÊÊ [0]

0 = Pulse Dial; 1 = Tone Dial

34 AUXILIARY RELAY FUNCTION

ÊÊÊÊ

[1]

0 = Trouble/Supv; 1 = Alarm (silenced by: SILENCE/RESET key press, or code

+ OFF entry); 2 = Smoke Detector Reset; 3 = Battery Save; 4 = Alarm (silenced

by: code + #67 entry).

Notes: 1.

Requires remote keypad for "code + OFF" or "code + #67" entry.

When function "1" or "4" is selected, program fields

85 and

86 to

select zones which will trigger AUX RELAY. When function "1" is

selected, program AUX RELAY timeout in field

31.

Entry of a number other than one specified will give unpredictable results.

DIALER PROGRAMMING (

40-

50) In fields

40,

41,

42, enter up to the number of digits shown. Do not fill

unused spaces. Enter 0-9; #+11 for '

'; #+12 for '#'; #+13 for a pause.

40 PABX ACCESS CODE ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ

Enter up to 4 digits.

If fewer than 4 digits entered, exit by pressing

(and press 41, if entering next

field). To clear entries from field, press

41 PRIMARY PHONE No. ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ

Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing

(and

press 42, if entering next field). To clear entries from field, press

42 SECONDARY PHONE No. ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ

Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing

(and

press 43, if entering next field). To clear entries from field, press

43 SUBSCRIBER ACCT No. ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ ÊÊÊÊ

Enter 0-9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; [#+15 for F]. Enter

as 4th digit, if 3+1 reporting is used.To clear entries from field, press

Examples:

For Acct No. 1234, enter: 1ÊÊ Ê2Ê Ê3ÊÊ 4ÊÊ

For Acct No. B234, enter: #+11 #+11 Ê2Ê Ê3ÊÊ 4ÊÊ

For Acct No. 123, enter: , 1, , 2, , 3, , T 1ÊÊ Ê2Ê Ê3ÊÊ ÊkÊ

Previous Menu

1 2 3 4

Sommario

Pagina 1 - Examples:

5110XM-PR 4/96ADEMCO 5110XM PROGRAMMING FORMFIELD FUNCTION PROGRAMMED VALUES[ ] = Default ValueSYSTEM SETUP (*20, *27)*20 MASTER CODE ÊÊÊÊ ÊÊÊÊ ÊÊÊ

Pagina 2 - Dual Reporting)

ÐbÐ*45 MAIN DIALER PULSE/TONE ÊÊÊÊ [0]0 = Pulse Dial; 1 = Tone Dial*46 REPORT FORMAT ÊÊÊÊ [0] also see field *27.0 = 3+1, 4+1 ADEMCO L/S STANDARD 6

Pagina 3

ÐcÐ*57 ZONE TYPE 18 DELAY ENABLE ÊÊÊÊ [1]0 = Disable Delay (ignore delay programmed in field *78)1 = Enable Delay (use delay programmed in field

Pagina 4 - A DIVISION OF PITTWAY CORP

5110XM-PR 4/96*78 ZONE TYPES 17 & 18 DELAYÊÊÊÊ ÊÊÊÊ[00]00-99 seconds.Note: Zone type 18 delay must be enabled in field *57.Combined sensor and

Più documenti per Sensori per il fumo ADEMCO 5110XM

Per vedere il documento ADEMCO 5110XM Guida Utente

ADEMCO 5110XM Guida Utente (24 pagine)

Per vedere il documento ADEMCO 5110XM Manuale Utente

ADEMCO 5110XM Manuale Utente (30 pagine)

Per vedere il documento ADEMCO 5110XM Guida di Configurazione

ADEMCO 5110XM Guida di Configurazione (64 pagine)

Commenti su questo manuale

Nessun commento

ADEMCO 5110XM Manuale Utente

Navigare online o scaricare Manuale Utente per Sensori per il fumo ADEMCO 5110XM. ADEMCO 5110XM PROGRAMMING FORM - Info Manuale Utente

Sommario

Più documenti per Sensori per il fumo ADEMCO 5110XM

Commenti su questo manuale

Prodotti e manuali riguardandi Sensori per il fumo ADEMCO 5110XM