ADEMCO 4160-12 C-COM Specifiche Pagina 11

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 59
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 10
POUER LED (6reen):
This LED indicates the presence of AC power
to operate the system.
AC power is lost.
This LED will turn off imnediately when
BYPASS KEY and LED. (Tellou):
When depressed subsequent to entry
of the security code and' followed by one or more zone nunber(s)
(1 to 6) while in the disarmed state, will individually shunt
the zone(s) designated [assuming that the programming of the
system pennits the shunting of the particular zone(s)].
When depressed subsequent to entry of the security code and
either the AWAY or STAY keys, the burglary system will arm with
any faulted zones shunted [assuming that the programming of
the system permits the forced automatic shunting of the particular
zone(s)].
The BYPASS LED is lit when one or more
zones
is shunted either
by force arming or by individual shunt selection. All shunts
are automatically removed when the system is turned off.
INSTANT Key and LED (Yellow):
When depressed subsequent to
entry of the security code and either the AWAY or STAY keys,
the burglary system will arm with the entry delay disabled on
any zones designated as entry/exit zones, making them instant
alarm zones for subsequent entry.
The INSTANT LED is lit when
the system is in this mode.
The entry delay for these zones
is restored subsequent to the system being turned off.
CODE Key and LED (Yet low) :
When depressed subsequent to entry
of the security code, will permit the entry of a secondary user
changeable 4 digit security code.
The code permits the performance
of all 'of the functions permitted by the PRDM programed master
code except ehange of itself to a new code.
In addition, the
secondary code is blocked from performance of any of its functions
.when the system is armed with the master code;as an added security
feature. Repeating digits are permitted in code entries and
if the secondary code entered happens to be the same code as
the master code except for the secondary code last digit matching
the duress digit, the duress silent panic capability will be
suppressed until the secondary code is c'hanged, so as to avoid
needless false alarms being reported to the central alarm monitoring
service.
The CODE LED is lit whenever a secondary code is
in
effect.
CHIHE Key and
‘LED
(Yetlaw):
Uhen depressed subsequent to entry
of the security code during the disarmed state, will enable
a mode in which any fault in Zones 1 or 2 nil 1 cause a brief
loud tone to be heard at each security console and remote keypad.
The mode can be disabled by subsequent reentry of the code and
redepression of the CHINE key. The CHIME LED is lit whenever
the CHIME mode is in effect.
The CHIME mode is never in effect
during tNe armed state.
READY
Key
and LED (6rem) :
When depressed at any time, permits
the Zone Identification Display to identify any presently faulted
zones.
Subsequent entry of the security code followed by depression
of the OFF Key turns off the zone display.
The READY LED is
628-11
688
Vedere la pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 58 59

Commenti su questo manuale

Nessun commento