ADEMCO VISTA-128B Guida di Configurazione Scaricare il pdf (Pagina 21)

Section 1 – General Description

1-5

Scheduling

Provides the following scheduling capabilities:

• Open/close schedules (for control of arming/disarming and reporting)

• Holiday schedules (allows different time windows for open/close schedules)

• Timed events (for activation of relays, auto-bypassing and unbypassing, auto-arming and

disarming, etc.)

• Access schedules (for limiting system access to users by time)

• End User Output Programming Mode (provides 20 timers for relay control)

Communication Formats

Supports the following formats for the primary and secondary central station receivers:

• ADEMCO Low Speed (Standard or Expanded)

• Sescoa/Radionics

• ADEMCO Express

• ADEMCO High Speed

• ADEMCO Contact ID

• Long Range Radio interface (ECP)

Audio Alarm Verification Option

Provides a programmable Audio Alarm Verification (AAV) option which can be used in

conjunction with an output relay to permit voice dialog between an operator at the central

station and a person at the premises. An optional AAV unit, such as Eagle model 1250, is

required.

The Eagle Model 1250 AAV unit is not UL Listed

Cross-Zoning Capability

Helps prevent false alarms by preventing a zone from going into alarm unless its cross-zone

is also faulted within 5 minutes.

Exit Error False Alarm Prevention Feature

• System can tell the difference between a regular alarm and an alarm caused by leaving

an entry/exit door open. If not subsequently disarmed, faulted E/E zone(s) and/or interior

zones will be bypassed and the system will arm.

• Generates an Exit Error report by user and by zone so the central station knows it was

an exit alarm and who caused it.

Built-in User's Manual and Descriptor Review

For end-user convenience, the VISTA-128B contains a built-in User’s Manual. By depressing

any of the function keys on the keypad for 5 seconds, a brief explanation of that function

scrolls across the alpha numeric display. In addition, all programmed zone descriptors can

be displayed (one at a time) by pressing the READY key for 5 seconds. This serves as a check

for installers to be sure all descriptors are entered properly.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 251 252

Nessun commento

ADEMCO VISTA-128B Guida di Configurazione Pagina 21