ADEMCO Security System Guida Utente Scaricare il pdf (Pagina 4)

Ð 4 Ð

SYSTEM OVERVIEW (cont'd)

Fire Protection

The fire protection portion of your security system (if used) is

always on and will sound an alarm if a fire condition is detected.

Refer to the FIRE ALARM SYSTEM section for important

information concerning fire protection, smoke detectors and

planning emergency exit routes from your house.

Burglary

Protection

The burglary protection portion of your system must be turned on

or "armed" before it will sense burglary alarm conditions. Your

system provides four modes of burglary protection: STAY,

AWAY, INSTANT and MAXIMUM, and even allows you to

BYPASS selected zones of protection while leaving the rest of

the system armed. The system also provides a CHIME mode, for

alerting users to the opening and closing of doors and windows

while the system is disarmed. Refer to the other sections of this

manual for procedures for using these features.

The following table lists the four different arming modes and the

results of each.

Arming Features For Each Arming Mode

Mode Exit Entry Perimeter Interior

Delay Delay Armed Armed

AWAY Yes Yes Yes Yes

STAY Yes Yes Yes No

INSTANT Yes No Yes No

MAXIMUM Yes No Yes Yes

Alarms

When an alarm occurs, both the keypad and external sounders

will sound, and the keypad will display the zone(s) causing the

alarm. If your system is connected to a central monitoring station,

an alarm message will also be sent. To stop the alarm sounding,

simply disarm the system.

Memory of Alarm

When an alarm condition occurs, the keypad displays the

number(s) of the zone(s) that caused the problem, and displays

the type of alarm (ex. FIRE, ALARM). It remains displayed until it

is cleared by disarming the system (see DISARMING THE

SYSTEM section).

1 2 3 4 5 6 7 8 9 ... 65 66

Nessun commento

ADEMCO Security System Guida Utente Pagina 4